If you own a Subaru, you know how convenient it is to have a key fob. With just a click of a button, you can easily access your car. However, just like any other electronic device, the battery of your Subaru key fob will eventually run out. You might wonder how to replace it when the time comes. Fortunately, replacing the battery in your Subaru key fob is a straightforward task that you can easily do at home. We will guide you on how to change the battery in your Subaru key fob. From the type of battery your key fob requires to opening and replacing the old battery, we will cover them all. Keep reading to learn more!
Introduction
If you own a Subaru car, then you must know that the key fob is an essential gadget that comes with it. The key fob is responsible for unlocking and locking your car without using a key. It’s no surprise that the battery of your key fob would need to be replaced after some time. We will guide you on how to change battery in Subaru key fob.
Step 1: The first step is to locate the small button on the edge of your key fob. This button is used to release the back cover, and it’s usually located on the bottom of the fob. Press and hold the button, and then slide the cover off.
Step 2: Once you have removed the back cover, you will see the battery and the battery compartment. Gently remove the old battery from the compartment by pushing on the tab holding the battery in place. Take note of the battery type and size written on it, so you can purchase the correct replacement.
Step 3: Now, take the new battery and insert it into the battery compartment with the positive side facing up. Make sure that the battery is securely in place before you continue.
Step 4: After inserting the battery correctly, you can now replace the back cover by aligning it with the slot on the fob and sliding it back until it clicks into place.
Step 5: Finally, test the key fob by pushing any of the buttons to ensure that the battery is working correctly.
How Do I Replace the Battery in My Subaru Key Fob?
If you are struggling with replacing the battery in your Subaru key fob, you are not alone. It is a common issue that many car owners face, but luckily it is also an easy one to resolve. With a few simple steps, you can replace the battery in your Subaru key fob and get back to using it without any issues.
- First, you need to identify the type of battery your Subaru key fob takes. Most Subaru key fobs take a CR2032 battery, but it’s always a good idea to double-check.
- Next, you need to open the key fob. This can be done by sliding the release button located on the back of the fob. Slide it to release the metal key, and then use the key to pry open the fob along the seam.
- Once the fob is open, you will see the battery. Use a small screwdriver or other similar tool to gently pry the old battery out of its slot.
- Insert the new battery into the slot, ensuring that the positive side of the battery faces up.
- Close the key fob by lining up the two sides and pressing them together. You should hear a click when the fob is securely closed.
- Finally, test the key fob to make sure it is working properly. If it is working, you’re all set. If not, double-check to make sure the battery was inserted correctly and that the key fob is securely closed.
Replacing the battery in your Subaru key fob is a quick and easy process that you can do yourself at home. With just a few simple steps, you can have your key fob up and running again in no time. If you have any issues, consult your car manual or contact a Subaru dealership for assistance.
What Type of Battery Does a Subaru Key Fob Take?
If you own a Subaru car, then you must have a key fob. A key fob is a remote control device that not only locks and unlocks your car but also performs other tasks such as starting the engine. But what happens when your key fob battery dies? Do you know what type of battery your key fob takes?
First of all, it is important to know that the type of Subaru key fob battery varies depending on the model, year, and trim level of your car. However, most of the Subaru key fobs use a 3V lithium coin cell battery. You can easily find the battery type by checking your car manual or contacting a Subaru dealer. Some popular battery types for Subaru key fob include CR1620, CR1632, and CR2032.
- CR1620: This battery type is commonly used in Subaru key fobs for older models such as 2004-2005 Forester, 2006 Baja, and 2003 Legacy.
- CR1632: This battery type is used for newer models such as 2006-2011 Impreza, 2012-2014 BRZ, and 2006-2014 Tribeca.
- CR2032: This battery type is used for most of the Subaru models such as Legacy, Outback, Crosstrek, and Forester released after 2012.
It is important to note that not all Subaru key fobs have a replaceable battery. Some models have a rechargeable battery that can only be replaced by a professional technician. Therefore, it is recommended to read your car manual before attempting to replace the battery or to contact a professional technician rather than doing it yourself.
How Do You Open the Key Fob on a Subaru?
Subaru key fobs can be programmed to open and lock the doors, trunk, and even start your car. However, if the fob battery loses its power, you may suddenly find yourself locked out of your car. Fortunately, changing the battery is a simple fix that you can perform yourself without the help of a mechanic. But before you can replace the battery, you need to open the key fob.
First, you need to locate the slot on the back of the key fob. This is where you will insert a small flat-head screwdriver or a plastic pry tool to pry open the fob. Make sure you insert the tool gently and slowly work your way around the edges of the key fob. Applying too much pressure may damage the fob.
- Insert a flat-head screwdriver or plastic pry tool into the slot on the back of the key fob.
- Gently pry open the fob, working your way around the edges.
Once you have successfully opened the fob, you can easily access the battery. Carefully remove the old battery and replace it with a new identical battery. In case you don’t know what type of battery your Subaru key fob uses, you can find that information in the owner’s manual.
| Steps to Open a Subaru Key Fob |
|---|
| 1. Locate the slot on the back of the key fob and insert a screwdriver or pry tool. |
| 2. Gently pry open the fob. |
| 3. Remove the old battery. |
| 4. Replace the battery with a new one of the same type. |
After replacing the battery, make sure to put the key fob back together. Align the two halves of the fob and gently apply pressure until it clicks into place. Your Subaru key fob is now ready to function normally.
By following these steps, you can save time and money by replacing the battery in your Subaru key fob yourself. However, if you feel unsure about this process or don’t feel comfortable handling the key fob, it’s best to seek professional help.
How Do You Change the Battery in a 2017 Subaru Outback Key Fob?
Driving a Subaru Outback can be a fun and adventurous experience for car enthusiasts. It’s important to keep the vehicle in good condition by regularly checking and replacing parts. One of those parts is the key fob that allows you to remotely lock and unlock the car. With use, the battery in your key fob may eventually run out of juice and need to be replaced. So, how do you change the battery in a 2017 Subaru Outback key fob?
Firstly, you need to open the key fob to access the battery compartment. You can do this by locating the latch on the back of the key fob and sliding it in the direction of the arrow. The cover should pop open and reveal the battery compartment. Carefully remove the old battery and dispose of it appropriately. It’s important to note that if you don’t replace the battery quickly, the key fob might lose its memory code.
Next, insert the new battery with the positive (+) side facing up. Use a small flathead screwdriver to gently press the battery into place until it clicks. Close the cover of the key fob, making sure it snaps securely in place. After completing the process, test the key fob to ensure that it’s working by pressing the lock or unlock buttons. If everything looks good, you’re good to go!
Here are some tips to keep in mind:
-
- Be sure to buy the right type of battery for your key fob. The 2017 Subaru Outback key fob takes a CR2032 battery.
- Always have a spare battery on hand, just in case you need to replace the current one.
- If you are unsure of how to replace the battery, contact your local Subaru dealer or a qualified mechanic for assistance.
Replacing the battery in your 2017 Subaru Outback key fob doesn’t have to be a daunting task. By following these simple steps, you can have a fully functional key fob in no time. Don’t forget to dispose of old batteries responsibly by taking them to a recycling center or other designated battery collection site.
